Britax B-Lively - Stroller Manual

Failure to follow all warnings and instructions could result in SERIOUS INJURY or DEATH.

Read these instructions carefully before using this product To ensure proper use, store this user guide in a convenient place so it can be consulted often

• Never leave child unattended.
• Do not use stroller with a child taller than 44 inches (111.8 cm).
• Do not use stroller with a child who weighs more than 55 lbs (25 kg). Exceeding this limit may cause stroller to become unstable.
• Avoid serious injury from falling or sliding out. Always use harness to secure child.
• Avoid finger entrapment or injury. Always ensure any child occupants or bystanders are away from the stroller while folding or unfolding.
• Stroller appropriate from birth, however, Britax recommends use only with an infant car seat until child has head and neck control.
• Do not overload under-seat storage basket – Maximum weight in basket is 10 lbs (4.5 kg). Overloading the basket may cause the stroller to become unstable and tip over.
• Do not overload the canopy pockets - Maximum weight in canopy pockets is 1 lb (0.45 kg). Overloading the canopy pockets may cause the stroller to become unstable and tip over.
• Do not attach parcels, bags, or other items to the handlebar or frame of stroller except those recommended by Britax, as stroller can become unstable and tip over.
• Always make certain that the stroller is fully open and locked before use.
• Assembly of this stroller must be performed only by an adult.
• Only use Britax approved child restraints, car seats, accessories and replacement parts with this stroller.
• Do not allow children to climb on or play with the stroller.
• Do not use the stroller on stairs, escalators, moving vehicles, or steep inclines. Stroller can tip over.
• Stroller is intended for walking speed only. Do not use while jogging, skating, or any activity other than walking.
• Always set the parking brake when stroller is not moving. Never load or unload the stroller without the parking brake set.
• Do not park on inclines. The parking brake is intended to park the stroller on flat surfaces only. Parking on inclines may result in tip over or runaway stroller.
• Do not exceed the manufacturer's maximum weight limit when using an infant car seat with this product. See infant car seat user guide for maximum occupant weight and other instructions.
• All infant car seats MUST be installed rear facing.
• Do not modify the stroller or any labels. Doing so voids the warranty and could lead to a dangerous condition.
• Failure to regularly inspect this product and its components to make sure they are in good condition and good working order can result in injury. Discontinue use of stroller if damaged or any parts are missing.

Features

Actual product may vary from images.

In The Box

Actual product may vary from images.

Assembly

Frame

1. Push the release on the chassis lock and open the frame.
   
2. Lift handle until frame locks into upright position.
   NOTE: After stroller is upright, push down on handle to make sure frame is locked in open position.
   

Front Wheel

Installing the Front Wheel

1. Slide the front wheel assembly onto the mounting post at the front of the stroller.
   

Ensure the swivel lock is at the top of the assembly when installing.

1. Pull wheel to ensure that it is secure.

Removing the Front Wheel

1. Press the release buttons at the bottom of the mounting post and pull the wheel away from the stroller.
   

Rear Wheels

Installing the Real Wheels

1. Slide the rear wheel axle into the rear wheel hub mounting bracket until it locks into place.
   
2. Pull wheel to ensure that it is secure.

Removing the Rear Wheels

1. Pull and hold the release lever at the bottom of the rear wheel hub while pulling the rear wheel away from the stroller.
   

Canopy

1. Slide the canopy stay brackets into the stroller frame mounts until they are in place.
   
2. Pull the inner canopy flap over the back of the stroller and secure the hook and loop fasteners to the stroller.
   
3. Drape the outer canopy back flap over the inner canopy flap and secure the hook and loop fasteners under each side of the outer canopy flap to the stroller seat.
   
4. Attach the hook and loop fasteners on each side of the canopy to the inside of the stroller frame.
   

Operation

• Before and during use, always make sure the child's hands and feet are away from wheels.
• Protect stroller when transporting and shipping to prevent damage to stroller and stroller components. Check closely for damage after transporting and shipping.

Folding the Product

Always apply brake and remove children before folding the stroller.

1. Press the frame release button.
   NOTE: Do not continue to hold the frame release button once pressed.
   
2. Remove your hand from stroller frame and hinge area and lift the frame release strap in the middle of the seat until the stroller collapses and the chassis lock engages.
   

Unfolding the Product

1. Push the release on the chassis lock and open the frame.
   
2. Lift the handle until frame locks into upright position.
   NOTE: After stroller is upright, push down on handle to make sure frame is locked in open position.
   

Adjusting the Seat

1. To recline, pull the recline adjuster release lever and slide it away from the seat.
   
2. To raise, pull both straps apart.
   

Using the Parking Brake

1. Press the brake pedal down to lock the brake.
   NOTE: Pressing the brake locks both back wheels.
2. Lift the brake pedal to release the brake.

Using the Front Wheel Swivel Lock

1. Press the swivel lock lever down to lock the front wheel.
2. Lift the swivel lock lever to allow the wheel to swivel.

Using the Front Basket Access

1. Pull up on the leg rest to access the under-seat storage basket from the front of the stroller.
   NOTE: Leg rest is not intended to be used as an adjustable leg rest.
   
2. Secure the hook and loop fasteners to close.

Canopy Vent

1. Fold the canopy vent forward to access additional ventilation.
   

Using the Harness

Shoulder and waist straps separate for care and maintenance, but should always be used together to secure your child.

1. Align the tongues on the waist straps with the retainers of the shoulder straps and slide through until they lock into place.
2. Insert the tongues into the buckle assembly until a click is heard.
   

Adjusting the Harness

The harness can be adjusted to three different heights. Always ensure proper adjustment at or above your child's shoulders.

1. Pull the harness strap retainer away from the seat back and turn 90 degrees to feed it through the harness slot.
   
2. Push the harness retainer through the appropriate harness slot to the back of the seat.
   
3. Turn the harness retainer to its original position as shown so it properly retains the harness.
   

Securing Your Child

1. Release the harness by depressing the button in the center of the buckle while pulling the two tongues away from the buckle assembly.
   
2. Fasten the harness by inserting the tongues on the harness straps into the buckle assembly.
   
3. Tighten or loosen the harness straps by sliding the harness adjusters.
   

Infant Car Seat Mode

• All infant car seats MUST be installed rear facing.
• Always remove the infant car seat receivers when not in use. Failure to do so may result in injury.

For non-Britax infant car seats, an infant car seat adapter frame must be used. This adapter frame is sold separately at select retailers and on us.britax.com.

Using the Infant Car Seat Receivers

Attaching the Infant Car Seat Receivers

NOTE: Receivers are marked left and right. Attach each from the position of the occupant.

1. Set the parking brake.
2. Align the receiver with the mount on the inside frame of the stroller, then push down until a click is heard. Pull up on the receiver to ensure it is secure.
   
3. Attach the snap on the receiver strap to the snap on the stroller seat strap inside the stroller frame.
   
4. Repeat for the other side.

Removing the Infant Car Seat Receivers

1. Unsnap the receiver strap from the stroller seat snap.
   NOTE: Ensure seat strap stays attached to stroller frame.
   
2. Press the button on the receiver and lift upward.
   
3. Repeat for the other side.

Using a Britax Infant Car Seat

Attaching a Britax Infant Car Seat

1. Set the parking brake.
2. Line up the adapter on the infant car seat with the receivers on the stroller.
   
3. Press down until locked into place.
4. Lift up on both sides of the infant car seat to ensure that it is secure.
   

Removing a Britax Infant Car Seat

Refer to your infant car seat user guide for information on the removal instructions for your specific model.

Care and Maintenance

Before each use, check the stroller and its components to make sure they are in good condition and good working order.

• Periodically check that the parking brake works properly and locks both wheels securely.
• Clean out any dirt or debris that may prevent the brake from working.

• Wipe the frame with a damp cloth and mild soap. Use clean, dry cloth or towel to wipe away excess water and soap.

• Do not machine wash or dry the cover.
• Hand wash with cold water and mild soap. Air dry to prevent shrinking.
• Do not iron.

• Wipe with a damp cloth and mild soap. Use a clean, dry cloth or towel to wipe away excess water and soap.
• Do not use abrasives, solvents, strong detergents, or household cleaners. These products can scratch, discolor, and weaken plastic or cause corrosion on metal surfaces.

• If the stroller gets wet, wipe with a clean cloth or towel to prevent corrosion.
• Do not fold the stroller when wet or damp. Always make sure that the stroller is dry before storing.

• To prevent damage to plastic parts, store away from extreme heat.
• Cover the stroller to prevent dust build-up and exposure to sunlight.
• Do not stack other items on top of the stroller.

Warranty

To make a claim under this Warranty, you must contact Britax Customer Services Department at 1-888-427-4829 or 704-409-1699 or write to 4140 Pleasant Road, Fort Mill, SC 29708. Proof of purchase is required.

You may also register online at us.britax.com/registration.

Britax Child Safety, Inc.
4140 Pleasant Road
Fort Mill, SC 29708
USA
A Britax Childcare Group Limited company
Tel.: 1-888-427-4829
Tel.: 1-704-409-1699
www.Britax.com

Documents / Resources

References

• Country Selector
• Britax | Home
• Product Registration Car Seats

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.